Rewrote 'Introduction' chapter in report.

docs/report.tex

@@ -25,67 +25,68 @@
 \parindent 0pt
 \parskip 1.5ex plus 0.5ex minus 0.2ex
 
-% Table of contant on separate page
+% Table of content on separate page
 \tableofcontents
 
 \chapter{Introduction}
 
-% Ruwe probleemstelling
-Multi-touch interaction is becoming increasingly common, mostly due to the wide
-use of touch screens in phones and tablets. When programming applications using
-this method of interaction, the programmer needs an abstraction of the raw data
-provided by the touch driver of the device. This abstraction exists in several
-multi-touch application frameworks like Nokia's
-Qt\footnote{\url{http://qt.nokia.com/}}. However, applications that do not use
-these frameworks have no access to their multi-touch events.
-
-% Aanleiding
-This problem was observed during an attempt to create a multi-touch
-``interactor'' class for the Visualization Toolkit \cite[VTK]{VTK}. Because VTK
-provides the application framework here, it is undesirable to use an entire
-framework like Qt simultaneously only for its multi-touch support.
-
-% Ruw doel
-The goal of this project is to define a generic multi-touch event triggering
-architecture. To test the definition, a reference implementation is written in
-Python.
-
-    \section{Definition of the problem}
-
-    % Hoofdvraag
-    The goal of this thesis is to a create generic architecture for a
-    multi-touch event triggering mechanism for use in multi-touch applications.
-
-    % Deelvragen
-    To design such an architecture properly, the following questions are relevant:
-    \begin{itemize}
-        \item What is the input of the architecture? Different touch drivers
-            have different API's. To be able to support different drivers
-            (which is highly desirable), there should be a translation from the
-            driver API to a fixed input format.
-        \item How can extendability be accomplished? The set of supported
-            events should not be limited to a single implementation, but an
-            application should be able to define its own custom events.
-        \item How can the architecture be used by different programming
-            languages? A generic architecture should not be limited to be used
-            in only one language.
-        \item Can events be used by multiple processes at the same time? For
-            example, a network implementation could run as a service instead of
-            within a single application, triggering events in any application
-            that needs them.
-    \end{itemize}
-
-    % Afbakening
-    The scope of this thesis includes the design of a generic multi-touch
-    triggering architecture, a reference implementation of this design, and its
-    integration into a test case application. To be successful, the design
-    should allow for extensions to be added to any implementation.
-
-    The reference implementation is a Proof of Concept that translates TUIO
-    messages to some simple touch gestures that are used by some test
-    applications.
-    %Being a Proof of Concept, the reference implementation itself does not
-    %necessarily need to meet all the requirements of the design.
+% TODO: put Qt link in bibtex
+Multi-touch devices enable a user to interact with software using intuitive
+body gestures, rather than with interaction tools like mouse and keyboard.
+With the upcoming use of touch screens in phones and tablets, multi-touch
+interaction is becoming increasingly common.The driver of a touch device
+provides low-level events. The most basic representation of these low-level
+event consists of \emph{down}, \emph{move} and \emph{up} events.
+
+Multi-touch gestures must be designed in such a way, that they can be
+represented by a sequence of basic events. For example, a ``tap'' gesture can
+be represented as a \emph{down} event that is followed by an \emph{up} event
+within a certain time.
+
+The translation process of driver-specific messages to basic events, and events
+to multi-touch gestures is a process that is often embedded in multi-touch
+application frameworks, like Nokia's Qt \cite{qt}. However, there is no
+separate implementation of the process itself. Consequently, an application
+developer who wants to use multi-touch interaction in an application is forced
+to choose an application framework that includes support for multi-touch
+gestures. Moreover, the set of supported gestures is limited by the application
+framework. To incorporate some custom event in an application, the chosen
+framework needs to provide a way to extend existing multi-touch gestures.
+
+% Hoofdvraag
+The goal of this thesis is to create a generic architecture for the support of
+multi-touch gestures in applications. To test the design of the architecture, a
+reference implementation is written in Python. The architecture should
+incorporate the translation process of low-level driver messages to multi-touch
+gestures. It should be able to run beside an application framework. The
+definition of multi-touch gestures should allow extensions, so that custom
+gestures can be defined.
+
+% Deelvragen
+To design such an architecture properly, the following questions are relevant:
+\begin{itemize}
+    \item What is the input of the architecture? This is determined by the
+        output of multi-touch drivers.
+    \item How can extendability of the supported gestures be accomplished?
+    % TODO: zijn onderstaande nog relevant? beter omschrijven naar "Design"
+    % gerelateerde vragen?
+    \item How can the architecture be used by different programming languages?
+        A generic architecture should not be limited to be used in only one
+        language.
+    \item Can events be used by multiple processes at the same time? For
+        example, a network implementation could run as a service instead of
+        within a single application, triggering events in any application that
+        needs them.
+\end{itemize}
+
+% Afbakening
+The scope of this thesis includes the design of a generic multi-touch
+triggering architecture, a reference implementation of this design, and its
+integration into a test case application. To be successful, the design should
+allow for extensions to be added to any implementation.
+
+The reference implementation is a Proof of Concept that translates TUIO
+messages to some simple touch gestures that are used by a test application.
 
     \section{Structure of this document}
 
@@ -99,7 +100,7 @@ Python.
     toolkit for the development of gesture-based applications. The toolkit
     states that the best way to classify gestures is to use machine learning.
     The programmer trains a program to recognize using the machine learning
-    library from the toolkit. The toolkit contains a callback-mechanism that
+    library from the toolkit. The toolkit contains a callback mechanism that
     the programmer uses to execute custom code when a gesture is recognized.
 
     Though multi-touch input is not directly supported by the toolkit, the
@@ -407,8 +408,8 @@ current, The object it represents has been lifted from the screen.
 
 SET provide information about movement. In the case of simple (x, y) positions,
 only the movement vector of the position itself can be calculated. For more
-complex objects such as fiducials, arguments like rotational position is also
-included.
+complex objects such as fiducials, arguments like rotational position and
+acceleration are also included.
 
 ALIVE and SET messages can be combined to create ``point down'', ``point move''
 and ``point up'' events (as used by the \cite[.NET application]{win7touch}).